![Inlet hose](/images/new-backgrounds/78931/7893143x1.webp)
Inlet hose
Connect the inlet hose to a water tap with an external thread of 3/4 .
The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.
Drain hose
Connect drain hose to | Required height: 30 to | Ensure that the hoses |
the sink. Secure it with | 100 cm above bottom of | are not kinked, crushed |
the supplied hose clamp. | the dishwasher. | or entangled. |
If you use a drain hose extension the total length should not be longer than 4 metres. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.
22
When connecting the drain hose to an under sink trap spigot, the en-
tire plastic membrane
(A)must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot.