Zanussi ZDF 312 Unloading the dishwasher, Activation/deactivation of the rinse aid dispenser

Models: ZDF 312

1 32
Download 32 pages 18.83 Kb
Page 18
Image 18
Activation/deactivation of the rinse aid dispenser

function "indicator light illuminates. This means that the function is active.

To deactivate the function press the same but- tons again until the indicator light correspond- ing to the "3 in 1" symbol turns off.

IMPORTANT!

If the drying results are not satisfactory we sug- gest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

The activation/deactivation of the rinse aid dispenser can only be possible with the "3 in 1 function" active.

Activation/deactivation of the rinse aid dispenser

1.Press the On/Off button. The dishwasher must be in setting mode.

2.Press simultaneously buttons B and C, un- til the indicator lights of buttons A, B, and C start flashing.

3.Press button B, the indicator lights of but- tons A and C turn off while the indicator light of button B goes on flashing.

4.To activate the rinse aid dispenser, press button B again, the end of programme in- dicator light illuminates, indicating that the rinse aid dispenser has been activated.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.

6.To deactivate the rinse aid dispenser again, follow the above instructions until the end of programme indicator light turns off.

IMPORTANT!

If you decide to turn back to the use of standard detergent system we advise that you:

1.Deactivate the 3 in 1 function.

2.Fill up the salt container and the rinse aid dispenser again.

3.Adjust the water hardness setting to the highest setting and perform 1 normal wash- ing programme without loading any dishes.

4.Adjust the water hardness setting accord- ing to the hardness of the water in your area.

5.Adjust the rinse aid dosage.

Unloading the dishwasher

Hot dishes are sensitive to knocks.

The dishes should therefore be allowed to cool down before removing from the appli- ance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

Unloading the dishwasher CAUTION!

When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off.

18

Page 18
Image 18
Zanussi ZDF 312 user manual Unloading the dishwasher, Activation/deactivation of the rinse aid dispenser