WARNING!
Only use, for connection to the water mains, new
CAUTION!
If the machine is connected to new pipes or pipes which have not been used for a long time,
Inlet hose
you should run the water for a few minutes be- fore connecting the inlet hose.
Connect the inlet hose to a water tap with an external thread of 3/4”.
The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.
Drain hose
Connect drain hose to the sink. Secure it with the supplied hose clamp.
Required height: 30 to 100 cm above bottom of the dishwasher.
Ensure that the hoses are not kinked, crushed or en- tangled.
When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Fail- ure to remove all the mem- brane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot.
25
