156998720en.qxp 1/31/2007 4:22 PM Page 21
WARNING!
●
●If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre.
●The plug must be accessible after the appliance has been installed.
●Never unplug the appliance by pulling on the cable. Always pull the plug.
Fitting under a counter
IMPORTANT!
Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.
WARNING!
The dishwasher must be secured against tilting.
Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).
This dishwasher is designed to be fitted under a kitchen counter or work surface.
No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.
The dishwasher incorporates adjustable feet to allow the adjustment of the height.
During all operations that involve accessibility to internal components the dishwasher has to be unplugged.
Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level. (See enclosed template).
21
