Nikon COOLPIXSP500BLK, COOLPIXP500BK user manual Error Messages, 217, Display Description Solution

Error Messages

The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them.

Display	Description		Solution	A
		Make sure that the lens cap has been
Q		removed, then turn the camera on
Turn the camera off,	Lens cap is attached or	again. If the error persists even after		23
remove the lens cap, and	lens error occurred.	the camera is turned off and then on
turn the camera on.		again, contact retailer or Nikon-
		authorized service representative.
O	Clock not set.	Set date and time.		188
(blinks)
N	Battery exhausted.	Charge or replace the battery.		18, 20
Battery exhausted.
		Turn off camera, and allow battery to
		cool down before resuming use. Five
		seconds after this message appears,
P	Battery temperature is	the monitor is turned off, and the		23
Battery temperature high	high.	power-on lamp flickers. After the
		lamp blinks for three minutes, the
		camera turns off automatically, but
		you can also press the power switch
		to turn it off manually.
P	Inside of the camera	Leave the camera off until the inside			Technical
	has become hot. The
The camera will turn off		of the camera has cooled and then		–
	camera turns off
to prevent overheating.		turn it on again.
	automatically.
					Notes
Q(blinks red)	Camera cannot focus.	•	Refocus.	32, 33
		•	Use focus lock.	33
					and
P	Camera cannot	Wait until message clears from display
Please wait for the	perform other
		automatically when recording is		–	Index
camera to finish	operations until
		complete.
recording.	recording is complete.
N	Write-protect switch is	Slide the write-protect switch to
Memory card is write				27
	in “lock” position.	“write” position.
protected.
P	No memory card is	Insert a memory card before starting
	inserted when trying			157
No card present.	to record a movie.	movie recording.

217