Nikon COOLPIXP500BK Transferring Images from a Camera to a Computer, Connecting to a Computer

Connecting to Televisions, Computers and Printers

Connecting to a Computer

BNotes on Power Source

•When connecting the camera to a computer, use a battery with a sufficient amount of charge remaining to prevent the camera from turning off unexpectedly.

•When the camera is connected to a computer via the supplied USB cable with Auto (default setting) selected for the Charge by computer option in the setup menu, the battery inserted into the camera is automatically charged using power supplied by the computer (A178, 202).

•If the AC Adapter EH-62A (A213) (available separately) is used, COOLPIX P500 can be powered from an electrical outlet. Do not use another make or model of AC adapter other than EH-62A. Failure to observe this precaution could result in overheating or in damage to the camera.

Transferring Images from a Camera to a Computer

1Start the computer to which ViewNX 2 was installed.

2Be sure that the camera is off.

3Connect the camera to the computer using the supplied USB cable.

Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable.

The camera is automatically turned on and the power-on lamp will light or blink. The camera monitor will remain off.

BConnecting the USB Cable

174The connection may not be recognized if the camera is connected to the computer via a USB hub.