Zanussi ZDM 868

FO 0018

Oven Cavity

The enamelled base of the oven cavity is best cleaned

whilst the oven is still warm.

Wipe the oven over with a soft cloth soaked in warm

soapy water after each use. From time to time it will

be necessary to do a more thorough cleaning, using a

proprietary oven cleaner.

DO NOT attempt to clean catalytic liners

Oven Shelves and Shelf Supports

To clean the oven shelves and the shelf supports, soak

in warm soapy water and remove stubborn marks

with a well wetted soap impregnated pad. Rinse well

and dry with a soft cloth.

The shelf supports can be removed for easy cleaning

(see diagram). Please, ensure the retaining nuts are

secure when refitting the shelf support.

When cleaning the shelf supports, take care not

to remove the lubricating grease behind the

telescopic runners. This is meant to ensure

their good operation.

Grease Filter

To prevent a build-up of fats on the fan impellor, the

grease filter must be fitted by clipping it over the

vents in the back panel.

To clean the grease filter

When the oven has cooled down, remove the filter by

pushing the protruding tongue on the filter upward,

and wash carefully.

The grease filter should be cleaned after every use.

The filter may be washed in a dishwasher on a 65°C

wash. If the filter is heavily soiled, place the filter in a

saucepan of water with approximately 1 teaspoon of

automatic washing powder or dishwasher powder.

Bring to the boil and leave to soak for approximately

30 minutes or longer depending on the degree of

soiling. Ensure the solution does not boil over as it

could mark your hob.

Rinse filter in clear water and dry.

Remember to refit the filter before using the oven

again.