Manuals / Zanussi / Kitchen Appliance / Dishwasher

Zanussi ZDS 300 manual Hints for test centres, Cup racks position A

Models: ZDS 300

1 20

Page 19

Hints for test centres

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).

Load:		9 standard place settings

Rinse aid setting:		position 4 (Type III)

Detergent dosage :		5 g + 20 g (Type B)

	Arrangement upper basket	Arrangement upper basket
	Arrangement upper basket	Arrangement upper basket	Arrangement lower basket
	without smaller bowl	with smaller bowl	Arrangement lower basket
	and salad-bowl	and salad-bowl
(glass holder in higher position)		(glass holder in higher position)

Arrangement cutlery basket

Cup racks: position A

Page 19

Image 19

Zanussi ZDS 300 manual Hints for test centres, Cup racks position A

Contents

Instruction book DISHWASHERTechnical specifications ContentsDisposal Safety instructionsInstallation Child safetyWater supply connections Installation instructionsFitting under a counter LevellingElectrical connection Water outlet hose connectionControl panel Description of the applianceThe control panel Delay start buttonThe dishwasher must be switched off Indicator lightsActivation/deactivation of the rinse aid dispenser be cancelled press simultaneously the function buttons Prior to using for the first timea Setting manually b Setting electronicallyFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidLoading cutlery and dishes In daily useThe lower basket To move to the higher position proceed as follows Adjusting the height of the upper basketThe cutlery basket The upper basketThe products Use of detergentFill with detergent Detergent tablets General adviceSpecial advice Different kinds of detergentWashing programmes If you want to set the delay start of a washing programme 5. Setting and starting the programme6. To interrupt or cancel a washing programme in progress 7. Cancelling the delay start in progressProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsSolutions a flashing fault code appearsthere are problems when operating the dishwasher Fault code / malfunctionThe dishes are wet and dull Service and spare partsThe dishes are not clean the wash results are not satisfactoryCup racks position A Hints for test centres152957 01/0 Subject to change without notice01/05 From the Electrolux Group. The World’s No.1 choice