Indicator lights
Phase indicator lights: have the following meanings:
Wash: illuminates when the washing and rinsing phases are running.
Drying: illuminates when the drying phase is running.
End of programme: illuminates when the washing programme has ended.
It also has added functions of visual signalling as:
-the setting of the water softener,
-activation/deactivation of the rinse aid dispenser,
-intervention of an alarm due to the malfunction of the machine.
As soon as you select a washing programme, the phase indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in progress which will remain lit with a static light.
Control indicator lights: have the following meanings:
Salt refilling indicator light: illuminates when the salt has run out.
Rinse aid refilling indicator light: illuminates when the rinse aid has run out.
The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.
"3 in 1" button: this appliance is equipped with the 3 in 1 function, that allows the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.
Select the 3 in 1 function before the setting of a washing programme.
Once selected this option (button indicator light illuminated ) it will remain active also for the following washing programmes, to deactivate the function, press the button (button indicator light off).
With the use of 3 in 1 combi detergent tablets, the cycle durations given in the "Washing programmes" chart may change.
NOTE: Once the programme is running, the 3 in 1 function can NO longer be changed. If you want to exclude the 3 in 1 function you have to cancel the programme setting and then deactivate the 3 in 1 function by pressing the 3 in 1 button.
In this case you have to set a washing programme again (and eventual options). To cancel the running programme see "Starting a washing programme" ("To cancel a washing programme in progress").
NOTE: in case that drying results are not satisfactory it is possible to activate only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can be carried out only with the 3 in 1 function active.
Activation/deactivation of the rinse aid dispenser
(The dishwasher must be switched off)
With the activation of the rinse aid dispenser also the rinse aid indicator light on the control panel is automatically activated.
1.Press the On/Off button. The On/Off indicator light illuminates (setting mode).
If a programme button indicator light is on, this means that a washing programme has been set. The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off indicator light) indicating that the set programme has been cancelled and the machine is now in setting mode.
2.Press simultaneously function buttons 2 and 3, until the indicator lights of the function buttons 1, 2 and 3 start flashing.
3.Press the function button 2, the indicator lights of function buttons 1 and 3 turn off while the indicator light of the function button 2 goes on flashing.
4.To activate the rinse aid dispenser, press the function button 2 again, the indicator light end of programme illuminates, indicating that the rinse aid dispenser has been activated.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
To deactivate the rinse aid dispenser follow the above instructions until the indicator light end of programme turns off.
7
