Filling with salt, To fill | Zanussi ZDS 699 EX specs

Filling with salt

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilled, remaining on

the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.To fill with salt, unscrew the cap of the salt container.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3.Using the funnel provided, pour in the salt until the container is full.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5.Screw on the cap tightly.

The salt container will require topping up periodically.

You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

SALET

SAL

SALZ

SEL

SR06

8

SAL01en

Image 8

Zanussi ZDS 699 EX manual Filling with salt, To fill with salt, unscrew the cap of the salt container

Contents

Dishwasher Contents Important safety information InstallationChild Safety During Use Control panel Open doorSalt Water tap Aid is automatically excluded Cycle will be carried out Audible signals Setting the water softener Before usePress Use salt from level 1 upwards To fill with salt, unscrew the cap of the salt container Filling with saltTo fill Ensure that the lid is closed after every refill Adjusting the doseRinse aid Using your appliance Loading your applianceLower basket Open the door and slide out the baskets to load the dishes For best results use the cutlery grid/s inserts provided Cutlery basketRemovable knife basket Adjusting the height of the upper basket When the top basket is in the higherUpper basket To move to the higher position proceed as follows If using powder detergents proceed as follows If using detergent in tablets proceed as followsUse of detergent Compact detergents with enzymes Hints and tips To save energyFor best washing results Items not suitable for dishwashers Washing programmes Operating sequence At the end of the washing programme Current programmeIt is now possible to select a new washing programme Cleaning the large filter Internal cleaningCleaning the central filter External cleaning Frost precautionsLeave the inside of the machine clean Moving the machine Something not working Actions listed below Service and spare parts Protection against floodingCustomer Care Department Slough Berkshire Guarantee conditions Standard guarantee conditionsEuropean Guarantee This guarantee does not cover Zanussi Service Force To contact your local Zanussi Service Centre telephone Midlands Technical specifications Hints for test centres Installation instructions Water supply connectionsNevertheless we advise a cold water supply Locknut must be correctly fitted to avoid water leaks Water outlet hose connection Waste connection must be at a height of between Electrical connection To fit the pad, press it onto the rear foot Recess height may be anywhere between 820Building-in Furniture door plinth Mounting the infill panelFixing to the adjacent units Width 596 mm Height Noise protection Kitchen plinth adjustmentFitting the vapour protection From the Electrolux Group. The world’s No.1 choice Electrolux Household Appliances Limited