IMPORTANT!
If you decide to turn back to the use of standard detergent system we advise that you:
1.Deactivate the
2.Fill up the salt container and the rinse aid dispenser again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal wash- ing programme without loading any dishes.
4.Adjust the water hardness setting accord- ing to the hardness of the water in your area.
5.Adjust the rinse aid dosage.
Unloading the dishwasher
•Hot dishes are sensitive to knocks.
The dishes should therefore be allowed to cool down before removing from the appli- ance.
•Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
•Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
CAUTION!
When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off.
Care and cleaning
Cleaning the filters
IMPORTANT!
NEVER use the dishwasher without filters. In- correct repositioning and fitting of the filters will produce poor washing results.
19
