Zanussi ZDT 311 user manual Select the Multi-Tab function before the start of a washing programme

This appliance is equipped with the "Multi-Tab function", that allows the use of the "Multi-Tab " combi detergent tablets.

These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...)

Check whether these detergents are suitable for your water hardness. See the manufactur- ers instructions.

Once this function is selected it will remain ac- tive also for the following washing programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are de- activated.

Select the "Multi-Tab function" before the start of a washing programme.

With the use of the "Multi-Tab function", the cy- cle durations may change.

Once the programme is running, the "Multi-Tab function" can NO longer be changed.

If you want to exclude the "Multi-Tab function" you have to cancel the programme setting and then deactivate the "Multi-Tab function". In this case you have to set a washing programme (and desired options) again.

Activation/deactivation of the Multi-Tab function

Press simultaneously the two buttons posi- tioned over the Multi-Tab symbol, until the "Multi-Tab function "indicator light illuminates. This means that the function is active.

To deactivate the function press the same but- tons again until the indicator light correspond- ing to the "Multi-Tab function" symbol turns off.

18

IMPORTANT!

If the drying results are not satisfactory we sug- gest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

•The activation/deactivation of the rinse aid dispenser can only be possible with the "Multi-Tab function" active.

Activation/deactivation of the rinse aid dispenser

1.Press the On/Off button. The dishwasher must be in setting mode.

2.Press simultaneously buttons B and C, un- til the indicator lights of buttons A, B, and C start flashing.

3.Press button B, the indicator lights of but- tons A and C turn off while the indicator light of button B goes on flashing.

4.To activate the rinse aid dispenser, press button B again, the end of programme in- dicator light illuminates, indicating that the rinse aid dispenser has been activated.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.

6.To deactivate the rinse aid dispenser again, follow the above instructions until the end of programme indicator light turns off.