BenQ MX514 Picture menu, Picture Mode, Reference, Brightness, Contrast, Color, Tint, Sharpness

2. PICTURE menu

FUNCTION	DESCRIPTION
Picture Mode	Pre-defined picture modes are provided so you can optimize your
	projector image set-up to suit your program type. See "Selecting a
	picture mode" on page 36 for details.
	Selects a picture mode that best suits your need for the image quality
	and further fine-tune the image based on the selections listed on the
Reference	same page below. See "Setting the User 1/User 2 mode" on page 36
Mode	for details.
	This function is only available when User 1/2 is
	selected.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on
	page 37 for details.
	This function is only available when User 1/2 is selected.
Contrast	Adjusts the degree of difference between dark and light in the image.
	See"Adjusting Contrast" on page 37 for details.
	This function is only available when User 1/2 is selected.
	Adjusts the color saturation level -- the amount of each color in a
Color	video image. See "Adjusting Color" on page 37 for details.
	This function is only available when User 1/2 is selected.
	This function is only available when a Video or S-Video signal
	is selected and the system format is NTSC or PAL.
	Adjusts the red and green color tones of the image. See "Adjusting
	Tint" on page 37 for details.
Tint	This function is only available when User 1/2 is selected.
	This function is only available when a Video or S-
	Video signal is selected and the system format is
	NTSC or PAL..
	Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness	Sharpness" on page 37 for details.
	This function is only available when User 1/2 is selected.
	This function is only available when a Video or S-Video signal
	is selected and the system format is NTSC or PAL.

52 Operation