BenQ MW516, MX514 Source, Volume +, Mute, Freeze, Capture, Test, Teaching Template, 22. CC

14.Source

Displays the source selection bar. See "Switching input signal" on page 33 for details.

15.Volume +/-

Adjusts the sound level. See "Adjusting the sound" on page 43 for details.

16.Page Up/Down

Page up/down arrows when connected through USB to a PC. See "Remote paging operations" on page 41 for details.

17.Mute

Toggles projector audio between on and off.

18. Freeze

Freezes the projected image. See "Freezing the image" on page 42 for details.

19.Capture

Captures current displayed screen to be MyScreen. See "Creating your own startup screen" on page 39 for details.

20.Test

Displays the test pattern. See "Use build-in test pattern" on page 27.

21.Teaching Template

Displays the selectable bar for teachers choosing the template as his/her suitable teaching background. See "Use Teaching Template" on page 44.

22.CC

Display the video term description on screen which is provided for hard-of- hearing viewers.

Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 15 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam.

•Operating the projector from the front

Introduction 13