Controls and functions
Projector
1
2
3 | 9 | |
4 | 10 | |
11 | ||
5 | ||
| 7 | |
6 | 12 | |
7 |
| |
8 | 13 | |
9 |
|
1.Focus ring
Adjusts the focus of the projected image. See
2.Zoom ring
Adjusts the size of the image. See "Fine- tuning the image size and clarity" on page 27 for details.
3.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 65 for detail.
4.TEMP(temperature) warning light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 65 for details.
5.MENU/EXIT
Turns on the
6.II POWER
Toggles the projector between standby mode and on.See "Starting up the projector" on page 25 and "Shutting down the projector" on page 46 for details.
7.Volume /Arrow keys ( 
/ 
Left,
/ 
Right)
Adjusts the sound level.
When the
8.ECO BLANK
Used to hide the screen picture. See "Hiding the image" on page 42 for details.
9.Keystone/Arrow keys ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 28 for details.
10.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 65 for details.
11.AUTO
Automatically determines the best picture timings for the displayed image. See
12.SOURCE
Displays the source selection bar. See "Switching input signal" on page 33 for details.
13.MODE/ENTER
Selects an available picture setup mode. See "Selecting a picture mode" on page 36 for details.
Activates the selected
10 Introduction
