Sun Microsystems Gigabit Ethernet MMF/UTP Adapter manual Operational Mode Parameters

Operational Mode Parameters

The parameters in TABLE 3-5determine the transmit and receive speed and duplexing capability. TABLE 3-5also describes the operational mode parameters and their default values.

TABLE 3-5Operational Mode Parameters

Parameter	Description
adv-autoneg-cap	Local interface capability advertised by the hardware
	0	= Forced mode
	1	= Autonegotiation (default)
adv-1000fdx-cap	Local interface capability advertised by the hardware
	0	= Not 1000 Mbit/sec full-duplex capable
	1	= 1000 Mbit/sec full-duplex capable (default)
adv-1000hdx-cap	Local interface capability advertised by the hardware
	0	= Not 1000 Mbit/sec half-duplex capable
	1	= 1000 Mbit/sec half-duplex capable (default)
adv-100T4-cap	Local interface capability advertised by the hardware
	0	= Not 100T4 capable (default)
	1	= 100T4 capable
adv-100fdx-cap	Local interface capability advertised by the hardware
	0	= Not 100 Mbit/sec full-duplex capable
	1	= 100 Mbit/sec full-duplex capable (default)
adv-100hdx-cap	Local interface capability advertised by the hardware
	0	= Not 100 Mbit/sec half-duplex capable
	1	= 100 Mbit/sec half-duplex capable (default)
adv-10fdx-cap	Local interface capability advertised by the hardware
	0	= Not 10 Mbit/sec full-duplex capable
	1	= 10 Mbit/sec full-duplex capable (default)
adv-10hdx-cap	Local interface capability advertised by the hardware
	0	= Not 10 Mbit/sec half-duplex capable
	1	= 10 Mbit/sec half-duplex capable (default)

Note – If a parameter’s initial setting is 0, it cannot be changed. If you try to change the setting, it will revert back to 0.

36 Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006