Additional phone features

Local Mode

If the WAN connection fails, the IP Phone loses communication with the Main Office Telephone Preference Service (TPS). It then registers with the MG 1000B and receives telephone services from the MG 1000B.

When in Local Mode, the telephone displays the message LOCAL MODE.

This section provides more information on the following topics:

Using Test Local Mode

Using Resume Normal Mode

Troubleshooting MG 1000B

Using Test Local Mode

Use Test Local Mode to check Local Mode functionality (make and receive telephone calls). Test Local Mode is useful when provisioning has changed for an IP Phone on an MG 1000B Controller.

1. Press the Services key.

(Services)

2.Press the Up/Down navigation keys to scroll and highlight Test Local Mode.

3.Press the Enter key (the telephone resets and registers back to the Main Office).

Using Resume Normal Mode

Use the Resume Normal Mode command to return to Normal Mode after testing survival functionality.

84

Page 88
Image 88
Nortel Networks 1110 manual Using Test Local Mode, Using Resume Normal Mode