Nortel Networks 1110

Connect the components

Figure 4: Remove the stand cover

2. Connect the AC power adapter (optional). Connect the AC power

adapter (not supplied) to the AC adapter jack in the bottom of the

phone (see Figure 5). Form a small bend in the cable, and then

thread the adapter cord through the channel in the stand base. Plug

the AC power adapter into the nearest AC power outlet.

Note: Your IPPhone 1110 supports both AC power and Power over

Ethernet (PoE), including IEEE 802.3af standard power. To use AC

power, use only the Nortel-approved AC power adapter (RoHS Global

Power Supply, PEC #: N0089601), which can be ordered separately.

To use Power over Ethernet (PoE) power, your connected LAN must

support PoE; an AC power adapter is not required.

Tilt Lever

Button

Center

Catch

Handset

cord channel