Sun Microsystems Gigabit Ethernet MMF/UTP Adapter 1 Read-Only Link Partner Capabilities Continued

TABLE 3-1

TABLE 3-1Read-Only Link Partner Capabilities (Continued)

Parameter	Description
lp_cap_100hdx	0	= No 100 Mbit/sec half-duplex transmission
	1	= 1000 Mbit/sec half-duplex
lp_cap_10fdx	0	= No 10 Mbit/sec full-duplex transmission
	1	= 10 Mbit/sec full-duplex
lp_cap_10hdx	0	= No 10 Mbit/sec half-duplex transmission
	1	= 10 Mbit/sec half-duplex
lp_cap_asm_pause	0	= Not asymmetric pause capable
	1	= Asymmetric pause towards link partner capability
lp_cap_pause	0	= Not symmetric pause capable
	1	= Symmetric pause capable

If the link partner is not capable of autonegotiation (when lp_autoneg_cap is 0),

the remaining information described in is not relevant and the parameter value = 0.

If the link partner is capable of autonegotiation (when lp_autoneg_cap is 1), then the speed and mode information is displayed when you use autonegotiation and the link partner capabilities.

Chapter 3 Configuring ipge and e1000 Driver Parameters 29