Sun Microsystems Gigabit Ethernet MMF/UTP Adapter Low-Profile Hardware and Software Requirements

TABLE 1-2

LED Displays on the UTP Low-Profile Adapter

Four LEDs are displayed on the front panel of the Sun PCI-Express Dual Gigabit Ethernet UTP adapter. They are labeled on the front panel as shown in

TABLE 1-2Front Panel Display LEDs for the UTP Low-Profile Adapter

Label	Meaning if Lit	Color	Source
ACT(1)	Data is being transmitted or	Green	I82571 (Circuit on board)
	received
LINK(1)	Link is up	Green/Amber	I82571 (Circuit on board)
ACT(0)	Data is being transmitted or	Green	I82571 (Circuit on board)
	received
LINK(0)	Link is up	Green/Amber	I82571 (Circuit on board)

Low-Profile Hardware and Software

Requirements

Before using the Sun PCI-Express Dual Gigabit Ethernet adapter, ensure that your system meets the following hardware and software requirements:

TABLE 1-3Hardware and Software Requirements for Sun PCI-Express Dual Gigabit Ethernet LP Adapter

Driver	Operating System	Servers
ipge	Solaris 10 SPARC Operating System and future compatible	Sun Fire™ T2000
	releases
e1000g	Solaris 10 x86 Operating System and future compatible	Sun Fire X2100, U40
	releases
e1000	RedHat Enterprise Linux 4.0 Update 3	Sun Fire X2100, U40
	SuSe Linux Enterprise Server 9 Service pack 3

Note – The preceding information is up-to-date at the time this manual was written. Visit Sun on the World Wide Web at http://www.sun.com/ for the latest information. Subsequent versions of this document have a higher number following the final dash. That is 819-4090-11, becomes 819-4090-12.

4 Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006