Sun Microsystems Gigabit Ethernet MMF/UTP Adapter manual # ifconfig -a

2.Use the ifconfig(1M) to configure a VLAN virtual device, for example:

#ifconfig ipge123000 plumb up

#ifconfig ipge4000 plumb up

The output of ifconfig -aon a system having VLAN devices ipge123000 and ipge224000:

#ifconfig -a

ipge4000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5

inet 0.0.0.0 netmask ff000000 ether 0:3:ba:d8:d3:a6

ipge123000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4

inet 0.0.0.0 netmask ff000000 ether 0:3:ba:d8:d3:a6

3.On the switch, set VLAN tagging and set VLAN ports to coincide with the VLANs you have set up on the server.

Using the examples in Step 2, you would set up VLAN ports 123 and 224 on the switch.

Refer to the documentation that came with your switch for specific instructions for setting VLAN tagging and ports.

Chapter 5 Configuring VLANs 61