Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

18

Page 17 Page 19
Page 18
Image 18
Zanussi ZDT 6041 Water outlet hose connection, Electrical connection, Green and Yellow Earth Blue- Neutral Brown- Live
Page 17 Page 19

ZDT 6041 specifications

The Zanussi ZDT 6041 is a modern dishwasher that elegantly combines efficiency, convenience, and advanced technology to meet the demands of contemporary households. With its sleek design and robust features, it's an appliance that not only enhances kitchen aesthetics but also simplifies the dishwashing process.

One of the standout features of the Zanussi ZDT 6041 is its impressive energy efficiency. This dishwasher boasts an A+ energy rating, ensuring that it consumes less power compared to traditional models. This is particularly beneficial for environmentally-conscious users looking to reduce their carbon footprint while also saving on utility bills.

With a capacity of 13 place settings, the ZDT 6041 is ideal for families and those who enjoy entertaining. This spacious interior allows users to wash more dishes in a single cycle, saving both time and water. The adjustable upper rack provides added versatility, accommodating larger pots and pans when needed.

Equipped with multiple wash programs, the Zanussi ZDT 6041 caters to diverse cleaning needs. The Intensive program is perfect for tackling stubborn, burnt-on food, while the Quick & Clean program allows for a fast wash cycle, perfect for those times when you need clean dishes in a hurry. Additionally, the Eco program ensures that your dishes are thoroughly cleaned while minimizing water and energy usage.

One of the notable technologies in the ZDT 6041 is the AutoSense feature, which intelligently adjusts the wash cycle based on the load's soil level. This ensures that your dishes are cleaned effectively without wasting resources. The built-in AquaStop system offers peace of mind by preventing any potential leaks, thus providing extra security when the dishwasher is in use.

The Zanussi ZDT 6041 also features a delay start function, allowing users to set the dishwasher to run at a more convenient time, possibly during off-peak hours to save even more energy. The easy-to-use control panel, characterized by a simple interface, makes setting and adjusting the preferred options hassle-free.

Additional characteristics like a low noise level ensure that the ZDT 6041 operates quietly, making it suitable for open-plan living spaces where noise can be an issue.

In conclusion, the Zanussi ZDT 6041 is a superb combination of performance, efficiency, and convenience, making it a valuable addition to any kitchen. Its advanced features and reliable technologies set it apart in a competitive market, providing users with an appliance that truly makes dishwashing a breeze.
Top Page Image Contents