What to do, when...

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer.

...there are problems when operating the dishwasher

The dishwasher will not start or stops during operation. Press the On/Off push button to switch the dishwasher off and carry out the following suggested corrective actions.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee.

Malfunction

Possible cause

Solutions

 

 

 

 

 

 

 

The water tap is blocked or furred with

Clean the water tap.

 

 

limescale.

 

 

 

 

 

 

 

The machine does not fill with

The water tap is turned off.

Turn the water tap on.

water.

 

 

 

 

 

The filter (where present) in the threaded hose

Clean the filter in the threaded hose

 

 

 

 

fitting at the water inlet valve is blocked.

fitting.

 

 

 

 

 

 

 

The water inlet hose has not been correctly laid

Check the water inlet hose connection.

 

 

or it is bent or squashed.

 

 

 

 

 

 

 

The dishwasher will not drain.

 

The siphon is blocked.

Clean out the siphon.

 

 

 

 

 

The water drain hose has not been correctly laid

Check the water drain hose connection.

 

 

 

 

or it is bent or squashed.

 

 

 

 

 

 

 

 

The dishwasher door has not been properly

Close the door.

 

 

closed.

 

 

 

 

 

 

 

The programme does not start

The main plug is not plugged in.

Insert the mains plug.

 

 

 

 

 

 

 

The fuse has blown in the household fuse box.

Replace the fuse.

 

 

 

There is a whistling noise during

The whistling is not a cause for concern.

Use a different brand of detergent.

washing

 

 

 

 

 

 

 

 

Once the checks have been carried out, press the On/Off push button, the programme will continue from the point in which it was interrupted. If the malfunction reappears contact the Service Force Centre.

...the wash results are not satisfactory

The dishes are not clean

●The wrong washing programme has been selected.

●The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

●The spray arms do not rotate freely due to wrong arrangement of the load.

●The filters in the base of the washing compartment are dirty or incorrectly positioned.

●Too little or no detergent has been used.

●Where there are limescales deposits on the dishes; the salt container is empty or the wrong level of the water softener has been selected.

●The drain hose connection is not correct.

●The salt container cap is not properly closed.

The dishes are wet and dull

●Rinse aid was not used.

●The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses and dishes

●Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

●Increase rinse aid dosing.

●The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.

14

Page 13 Page 15
Page 14
Image 14
Zanussi ZDT 6041 What to do, when, There are problems when operating the dishwasher, Wash results are not satisfactory
Page 13 Page 15

ZDT 6041 specifications

The Zanussi ZDT 6041 is a modern dishwasher that elegantly combines efficiency, convenience, and advanced technology to meet the demands of contemporary households. With its sleek design and robust features, it's an appliance that not only enhances kitchen aesthetics but also simplifies the dishwashing process.

One of the standout features of the Zanussi ZDT 6041 is its impressive energy efficiency. This dishwasher boasts an A+ energy rating, ensuring that it consumes less power compared to traditional models. This is particularly beneficial for environmentally-conscious users looking to reduce their carbon footprint while also saving on utility bills.

With a capacity of 13 place settings, the ZDT 6041 is ideal for families and those who enjoy entertaining. This spacious interior allows users to wash more dishes in a single cycle, saving both time and water. The adjustable upper rack provides added versatility, accommodating larger pots and pans when needed.

Equipped with multiple wash programs, the Zanussi ZDT 6041 caters to diverse cleaning needs. The Intensive program is perfect for tackling stubborn, burnt-on food, while the Quick & Clean program allows for a fast wash cycle, perfect for those times when you need clean dishes in a hurry. Additionally, the Eco program ensures that your dishes are thoroughly cleaned while minimizing water and energy usage.

One of the notable technologies in the ZDT 6041 is the AutoSense feature, which intelligently adjusts the wash cycle based on the load's soil level. This ensures that your dishes are cleaned effectively without wasting resources. The built-in AquaStop system offers peace of mind by preventing any potential leaks, thus providing extra security when the dishwasher is in use.

The Zanussi ZDT 6041 also features a delay start function, allowing users to set the dishwasher to run at a more convenient time, possibly during off-peak hours to save even more energy. The easy-to-use control panel, characterized by a simple interface, makes setting and adjusting the preferred options hassle-free.

Additional characteristics like a low noise level ensure that the ZDT 6041 operates quietly, making it suitable for open-plan living spaces where noise can be an issue.

In conclusion, the Zanussi ZDT 6041 is a superb combination of performance, efficiency, and convenience, making it a valuable addition to any kitchen. Its advanced features and reliable technologies set it apart in a competitive market, providing users with an appliance that truly makes dishwashing a breeze.
Top Page Image Contents