Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

17

Page 16 Page 18
Page 17
Image 17
Zanussi ZDT 6041 Installation instructions, Building-in, Levelling, Fixing to the adjacent units, Water supply connections
Page 16 Page 18

ZDT 6041 specifications

The Zanussi ZDT 6041 is a modern dishwasher that elegantly combines efficiency, convenience, and advanced technology to meet the demands of contemporary households. With its sleek design and robust features, it's an appliance that not only enhances kitchen aesthetics but also simplifies the dishwashing process.

One of the standout features of the Zanussi ZDT 6041 is its impressive energy efficiency. This dishwasher boasts an A+ energy rating, ensuring that it consumes less power compared to traditional models. This is particularly beneficial for environmentally-conscious users looking to reduce their carbon footprint while also saving on utility bills.

With a capacity of 13 place settings, the ZDT 6041 is ideal for families and those who enjoy entertaining. This spacious interior allows users to wash more dishes in a single cycle, saving both time and water. The adjustable upper rack provides added versatility, accommodating larger pots and pans when needed.

Equipped with multiple wash programs, the Zanussi ZDT 6041 caters to diverse cleaning needs. The Intensive program is perfect for tackling stubborn, burnt-on food, while the Quick & Clean program allows for a fast wash cycle, perfect for those times when you need clean dishes in a hurry. Additionally, the Eco program ensures that your dishes are thoroughly cleaned while minimizing water and energy usage.

One of the notable technologies in the ZDT 6041 is the AutoSense feature, which intelligently adjusts the wash cycle based on the load's soil level. This ensures that your dishes are cleaned effectively without wasting resources. The built-in AquaStop system offers peace of mind by preventing any potential leaks, thus providing extra security when the dishwasher is in use.

The Zanussi ZDT 6041 also features a delay start function, allowing users to set the dishwasher to run at a more convenient time, possibly during off-peak hours to save even more energy. The easy-to-use control panel, characterized by a simple interface, makes setting and adjusting the preferred options hassle-free.

Additional characteristics like a low noise level ensure that the ZDT 6041 operates quietly, making it suitable for open-plan living spaces where noise can be an issue.

In conclusion, the Zanussi ZDT 6041 is a superb combination of performance, efficiency, and convenience, making it a valuable addition to any kitchen. Its advanced features and reliable technologies set it apart in a competitive market, providing users with an appliance that truly makes dishwashing a breeze.
Top Page Image Contents