INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.

Important

Positioning

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

mm100

A mm10 NP002

B

10 mm

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath.

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool (see figure).

A

45°

PR60

D200

14

Page 13 Page 15
Page 14
Image 14
Zanussi ZENB 2625 manual Installation, Positioning, Rear spacers
Page 13 Page 15

ZENB 2625 specifications

The Zanussi ZENB 2625 is a sophisticated built-in oven that combines advanced technology with elegant design, making it an ideal choice for modern kitchens. This appliance offers a wide array of features and functions that cater to both novice and experienced cooks.

One of the standout features of the ZENB 2625 is its multifunctional cooking capabilities. With multiple cooking modes, including conventional, fan-assisted, and grilling options, users can easily select the perfect setting for their culinary creations. The fan-assisted mode ensures even heat distribution, allowing for consistent cooking results, whether it's baking, roasting, or grilling.

The oven is equipped with a spacious interior that provides ample room for cooking multiple dishes simultaneously. Its generous capacity allows you to prepare large meals, making it convenient for family gatherings or entertaining guests. Additionally, the oven includes multiple shelf positions, giving you the flexibility to adjust the oven’s space according to your cooking requirements.

Zanussi has also integrated user-friendly controls into the ZENB 2625. The intuitive digital display allows for easy navigation through different settings, while the programmable timer ensures that meals are cooked to perfection every time. The oven also features easy-to-use knobs for manual temperature adjustments, enhancing the overall cooking experience.

Safety is a priority with the ZENB 2625. The oven comes with a triple-glazed door that maintains a cool exterior, reducing the risk of burns, especially in households with children. The appliance also features a child lock function, allowing parents to use the oven with peace of mind.

Cleaning this oven is made effortless with the inclusion of an easy-clean enamel interior, which helps to reduce the effort required to maintain the appliance. Additionally, the oven's self-cleaning feature saves time and ensures a hygienic cooking environment.

The design of the ZENB 2625 is sleek and modern, fitting seamlessly into any kitchen aesthetic. Its built-in design maximizes space efficiency while providing a contemporary look that complements existing cabinetry.

In summary, the Zanussi ZENB 2625 offers an impressive blend of functionality, safety features, and stylish design, ensuring it caters to the diverse needs of home chefs. With its advanced cooking technologies and ease of use, this oven stands out as a valuable addition to any kitchen.
Top Page Image Contents