Service or repair, Technical Data | Zanussi ZFC 352 WBB, ZFC 328 WBB

Is there a power failure?

Is the temperature control set to the Off position?

The red light is on

Is the lid not closed completely? See underneath.

Is the temperature control set correctly for the surrounding conditions?

Is the freezer too close to a source of heat?

The inside light does not work

Is the power supply cord unplugged?

Is the light bulb loose in the socket or burned out?

The motor seems to run too much

Is the lid not closed completely? See underneath.

Is the room termperature hotter than normal?

Has a large amount of fresh food just been added to the freezer?

Is the lid opened often?

Is the temperature control set correctly for the surrounding conditions?

Is the lid seal damaged or deformed?

Is there enough air circulation space around the freezer?

Is the Super Freeze function activated accidentally?

Termperature is too warm

Has a large amount of food just been added to the freezer?

Is the lid opened often?

Is the temperature control set correctly for the surrounding conditions?

Too much ice has formed

Is the lid not closed completely? See underneath.

Is the water drainage plug correctly positioned?

The lid will not close completely

Is there excessive frost or a package preventing the lid from closing?

Are food packages blocking the lid?

Is the lid seal dirty or sticky?

Does the freezer wobble or seem unstable?

The lid is difficult to open

Is the lid seal dirty or sticky?

Is the valve blocked?

If you still need help, please contact your local Service Force Centre.

Service or repair

In cases of breakdown or faults, your freezer must be serviced by an authorized Electrolux Service Centre.

Important! Under no circumstances should you attempt to repair the appliance yourself.

Model

This appliance complies with the following EC Directives: 73/23/EEC of 19. 02. 1973 Low-Voltage Directive

89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC Directive)