DOOR REVERSAL INSTRUCTIONS
Unplug the appliance from the power supply before carrying out the below- mentioned operations.
Remove the ventilation grill (D).
Unscrew the bottom hinge (E).
Remove the freezer door by releasing it from the middle hinge (H).
Unscrew the middle hinge.
Remove the fridge door by releasing it from the top hinge pin (5).
Remove the pin and refit it on the other side.
Replace the fridge door, and replace the middle hinge to the left hand side.
Replace the freezer door.
Screw down the bottom hinge (E) on the opposite side by using the screws previously removed.
Remove the plug (F) from the ventilation grill (D) and replace it on the opposite side.
The doors can be aligned by adjusting the middle hinge, with help of a tool, after having slackened the two screws.
Warning:
After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
| Fig. 5 |
E | F |
| |
F |
|
| F |
D |
|
F |
|
D640 |
|
| Fig. 5a |
| 5 |
D548 |
|
| Fig. 5b |
D419 |
|
| Fig. 5c |
H |
|
D405 |
|
7
