Drink dispenser
The container for cooling drinks (Fig. 11) is located in the door of the fridge. It is easily removed from its runners for filling and cleaning by pushing it upwards from the left side and then by pulling sharply outwards. Remove the clip on lid to fill.
Fig. 11
D208
To pour a drink, press a glass upwards against the tap arms. To stop the flow of liquid remove the glass.
Before using the dispenser, we recommend that you rinse it several times with hot water. For a thorough cleaning of the container add a spoonful of bicarbonate of soda to the rinsing water. Push the dispenser tap on and off several times to allow sugar deposits from soft drinks or wines to dissolve, or alternatively remove for cleaning by unscrewing in an anticlockwise direction. Empty the container and rinse thoroughly with clean water.
If using the dispenser to store fresh fruit juice, particular attention should be paid to the manufacturers storage instructions. It is also advisable to clean the dispenser thoroughly between every filling, using a solution of sterilising fluid.
Use and features of the «CRISP’N FRESH» filter
“Crisp’N Fresh” is the glass shelf on top of the salad crispers which is fitted with special removable green filters.
These filters allow cool air from the fridge to circulate through the drawers but help prevent moisture loss. By retaining moisture in foods such as fresh fruit, vegetables and salad they are kept fresher for longer.
Fig. 12
Cleaning the filter
The filter is held by two small support frames which press into position and are therefore easily removed for cleaning. To do this, turn the glass shelf upside down and release the frames as shown in Fig. 13. The filters and the glass cover can be washed gently in warm soapy water, they should not be put in the dishwasher.
Fig. 13
D003
Replacement filters can be purchased as a spare part from your local Zanussi Service Centre.
13
