Door reversal directions
Before carrying out the operations described below, pull out the mains plug from the wall socket.
Gently lay the fridge/freezer on its back with the top held away from the floor by
Remove the plastic cover (A) (which clips in) masking the bottom hinge.
Remove bottom hinge (C).
Slide out the lower door from middle hinge (H) and remove the latter.
Slide out the upper door from pin (G), unscrew the latter and then screw it down into the hinge provided on the opposite side, after having removed the small plugs which should then be fitted on the opposite side.
Refit the upper door and the middle hinge on the opposite side.
Refit the lower door and bottom hinge (C) on the opposite side.
Refit the plastic cover (A) on the bottom hinge.
Blank off all unused holes with plugs (B).
Attention
After completion of the door reversibility operation, check that the door gasket adheres to the cabine”. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabine”. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
Fig. 5
G
D590
Fig. 6
H
PR24
| Fig. 7 |
D419 |
|
| Fig. 8 |
| C |
B | A |
| |
D589 |
|
8
