To adjust, use a thin bladed screwdriver and turn the adjustment screw (see diagram) until the flame is steady and does not extinguish, when the knob is turned from MIN to MAX. Repeat this procedure for all burners.

Commissioning

When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below.

-Turn the gas tap to the MAX position and ignite.

-Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below.

Procedure:

ΦRe-ignite the burner and set to MIN. Remove the control knob.

Pressure Testing

Minimum adjustment screw

Remove left hand pan support and front left

 

Φ burner cap and crown.

 

Fit manometer tube over the injector.

 

Turn on the burner gas supply and ignite

 

another burner.

 

The pressure reading should be nominally

 

20mbar and must be between 17 mbar and

 

25mbar.

 

Turn off the burner supplies.

 

Conversion from Natural Gas to LPG

It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted. The gas rate is adjusted to suit.

Method

•Ensure that the gas taps are in the 'OFF' position

•Isolate the hob from the electrical supply

•Remove all pan supports, burner caps, rings, crowns and control knobs.

•With the aid of a 7mm box spanner the burner injectors can then be unscrewed and replaced by the appropriate LPG injectors.

To adjust the gas rate

With the aid of a thin bladed screwdriver completely tighten down the by pass adjustment screw. Upon completion stick the replacement rating plate on the under side of the hob.

IMPORTANT

The replacement/conversion of the gas hob should only be undertaken by a competent person.

15

Page 14 Page 16
Page 15
Image 15
Zanussi ZGF982C manual Commissioning, Conversion from Natural Gas to LPG, To adjust the gas rate
Page 14 Page 16

ZGF982C specifications

The Zanussi ZGF982C is a cutting-edge appliance that combines innovative design with user-friendly features, making it an excellent choice for modern households. As a built-in gas hob, it stands out for its sleek appearance and powerful performance, catering to the needs of avid cooks and busy families alike.

One of the main features of the Zanussi ZGF982C is its efficient cooking capabilities. With a total of four gas burners, including a high-output wok burner, users can enjoy a versatile cooking experience. The high-output burner is perfect for searing meat or sautéing vegetables at high temperatures, while the other burners can handle everyday tasks like boiling pasta or simmering sauces. This flexibility ensures that all cooking needs are met seamlessly.

The hob is designed with safety in mind, featuring flame failure safety devices on each burner. This technology automatically cuts off the gas supply if the flame goes out, providing peace of mind for users. Additionally, the hob's intuitive control dials make it easy to adjust heat levels accurately, enhancing the cooking experience.

Another notable characteristic of the Zanussi ZGF982C is its easy-to-clean design. The hob's enamel-coated cast iron pan supports provide excellent stability for pots and pans while also being simple to maintain. This functionality means that after a busy cooking session, cleaning up is quick and uncomplicated.

Installation is straightforward, and the appliance can be integrated into various kitchen designs, making it a flexible choice for renovations or new builds. The compact dimensions of the Zanussi ZGF982C ensure that it fits well in smaller kitchens without sacrificing cooking power.

In terms of aesthetics, the Zanussi ZGF982C features a contemporary design with a stainless steel finish that not only adds a modern touch but also resists tarnishing and staining. This makes it a visually appealing addition to any kitchen layout.

Overall, the Zanussi ZGF982C combines powerful performance with safety features and ease of maintenance, making it an excellent choice for anyone looking to upgrade their cooking facilities. With its robust build quality and thoughtful design, it promises to meet the demands of today’s culinary enthusiasts while enhancing the overall kitchen experience.
Top Page Image Contents