Electrical connections

Seal

FO 0199

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:

Permanent Connection

In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C.

Supply cable replacement

The cable used to connect the hob to the electrical supply must comply to the specifications given below.

Min. size Cable/flex

Cable / flex type

Fuse

 

 

 

0.75 mm2

H05 V2V2-F (T90)

3 A

 

 

 

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

Φ— Connect the green and yellow (earth) wire to the terminal in the plug which is marked with

the letter 'E' or the earth symbol or coloured green and yellow.

—Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black.

—Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a seriuos safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

FO 0390

12

Page 11 Page 13
Page 12
Image 12
Zanussi ZGF982C manual Electrical connections, Supply cable replacement, This HOB Must be Earthed
Page 11 Page 13

ZGF982C specifications

The Zanussi ZGF982C is a cutting-edge appliance that combines innovative design with user-friendly features, making it an excellent choice for modern households. As a built-in gas hob, it stands out for its sleek appearance and powerful performance, catering to the needs of avid cooks and busy families alike.

One of the main features of the Zanussi ZGF982C is its efficient cooking capabilities. With a total of four gas burners, including a high-output wok burner, users can enjoy a versatile cooking experience. The high-output burner is perfect for searing meat or sautéing vegetables at high temperatures, while the other burners can handle everyday tasks like boiling pasta or simmering sauces. This flexibility ensures that all cooking needs are met seamlessly.

The hob is designed with safety in mind, featuring flame failure safety devices on each burner. This technology automatically cuts off the gas supply if the flame goes out, providing peace of mind for users. Additionally, the hob's intuitive control dials make it easy to adjust heat levels accurately, enhancing the cooking experience.

Another notable characteristic of the Zanussi ZGF982C is its easy-to-clean design. The hob's enamel-coated cast iron pan supports provide excellent stability for pots and pans while also being simple to maintain. This functionality means that after a busy cooking session, cleaning up is quick and uncomplicated.

Installation is straightforward, and the appliance can be integrated into various kitchen designs, making it a flexible choice for renovations or new builds. The compact dimensions of the Zanussi ZGF982C ensure that it fits well in smaller kitchens without sacrificing cooking power.

In terms of aesthetics, the Zanussi ZGF982C features a contemporary design with a stainless steel finish that not only adds a modern touch but also resists tarnishing and staining. This makes it a visually appealing addition to any kitchen layout.

Overall, the Zanussi ZGF982C combines powerful performance with safety features and ease of maintenance, making it an excellent choice for anyone looking to upgrade their cooking facilities. With its robust build quality and thoughtful design, it promises to meet the demands of today’s culinary enthusiasts while enhancing the overall kitchen experience.
Top Page Image Contents