130CHAPTER 9: CONFIGURING IP AND MAC ADDRESS INFORMATION
Removing ARP The ARP Settings Remove Page provides parameters for removing ARP Entries entries from the ARP Table.
The monitor user has no access to this page.
To remove ARP entries:
1Click Administration > ARP Settings > Remove. The ARP Settings Remove Page opens:
Figure 62 ARP Settings Remove Page
The ARP Settings Remove Page contains the following fields:
■Clear ARP Table Entries — Specifies the types of ARP entries that are cleared. The possible values are:
■None — Maintains the ARP entries.
■All — Clears all ARP entries.
■Dynamic — Clears only dynamic ARP entries.
■Static — Clears only static ARP entries.
■Checkbox (unnamed) — Selects the ARP entry for removal.
■Interface — Indicates the VLAN for which ARP parameters are defined.
■IP Address — Indicates the station IP address which is associated with the MAC address.
