168CHAPTER 13: CONFIGURING QUALITY OF SERVICE

Configuring DSCP The DSCP to Queue Setup Page contains fields for mapping DSCP settings Queue to traffic queues. For example, a packet with a DSCP tag value of 3 can

be assigned to queue 1.

The monitor user has no access to this page.

To map CoS to Queues:

1Click Device > QoS > DSCP to Queue > Setup. The DSCP to Queue Setup Page opens:

Figure 82 DSCP to Queue Setup Page

The DSCP to Queue Setup Page contains the following fields:

Restore Defaults — Restores the device factory defaults for mapping DSCP values to a traffic forwarding queue.

DSCP — Displays the incoming packet’s DSCP value.

Queue — Specifies the traffic forwarding queue to which the DSCP priority is mapped. Four traffic priority queues are supported.

2Define the queue number in the Queue field next to the required DSCP value.

3Click . The DSCP values are mapped to a queue, and the device is updated.

Page 168
Image 168
3Com 2924-PWR manual Be assigned to queue, To map CoS to Queues