114CHAPTER 7: AGGREGATING PORTS

Modifying LACP LAG ports can contain different media types if the ports are operating at the same speed. Aggregated links can be set up manually or automatically established by enabling LACP on the relevant links. Aggregate ports can be linked into link-aggregation port-groups. The LACP Modify Page contains fields for modifying LACP LAGs.

To modify LACP for LAGs:

1Click Port > LACP > Modify. The LACP Modify Page opens:

Figure 52 LACP Modify Page

The LACP Modify Page contains the following fields:

LACP System Priority — Specifies system priority value. The default value is 1. The field range is 1-65535.

Select Port — Selects the port number to which timeout and priority values are assigned.

LACP Port Priority — Specifies the LACP priority value for the port. The default is 1. The field range is 1-65535.

LACP Timeout — Selects the administrative LACP timeout. The possible field values are:

Long — Specifies the long timeout value. This is the default.

Short — Specifies the short timeout value.

Page 114
Image 114
3Com 2924-PWR manual Lacp Modify