169
Configuring Trust The Trust Setup Page contains information for enabling trust on the Settings device.
To enable Trust:
1Click Device > QoS > Trust > Setup. The Trust Setup Page opens:
Figure 83 Trust Setup Page
The Trust Setup Page contains the following fields:
■Trust Mode — Specifies which packet fields to use for classifying packets entering the device. When no rules are defined, the traffic containing the predefined packet CoS field is mapped according to the relevant trust modes table. Traffic not containing a predefined packet field is mapped to "best effort". The possible Trust Mode field values are:
■CoS — Classifies traffic based on the CoS tag value.
■DSCP — Classifies traffic based on the DSCP tag value.
2Define the fields.
3Click 
. The selected Trust mode is enabled on the device.
