138CHAPTER 9: CONFIGURING IP AND MAC ADDRESS INFORMATION
Defining Aging Time The Address Table Setup Page allows the network manager to define the Address Table Aging Time. The Aging Time is the amount of time the MAC addresses remain in the Dynamic Address table before they are timed out if no traffic from the source is detected. The default value is 300 seconds.
The monitor users have no access to this page.
To define the Aging Time:
1Click Monitoring > Address Table > Setup. The Address Table Setup Page opens:
Figure 66 Address Table Setup Page
The Address Table Setup Page contains the following field:
■Aging Time — Defines the amount of time the MAC address remains in the Dynamic Address table before it is timed out if no traffic from the source is detected. The default value is 300 seconds.
2Enter the desired aging time.
3Click 
. The MAC address table configuration is enabled, and the device is updated.
