3Com 2924-PWR manual To define Snmp traps, Snmp Traps Setup

159

■Access Mode — Displays the access rights of the community. The possible field values are:

■Read Only — Management access is restricted to read-only, and changes cannot be made to the community.

■Read Write — Management access is read-write and changes can be made to the device configuration, but not to the community.

2For each SNMP Community to be removed, check the box to the left of the row in the table. To remove all SNMP Communities, the topmost box may be checked.

3Click . The SNMP Communities are removed, and the device is updated.

Defining SNMP Traps The SNMP Traps Setup Page contains information for defining filters that determine whether traps are sent to specific users, and the trap type sent.

Monitor users have no access to this page.

To define SNMP traps:

1Click Administration > SNMP > Traps. The SNMP Traps Setup Page opens:

Figure 75 SNMP Traps Setup Page