103

10 — Indicates the port is currently operating at 10 Mbps.

100 — Indicates the port is currently operating at 100 Mbps.

1000 — Indicates the port is currently operating at 1000 Mbps.

Auto — Use to automatically configure the port.

No Change — Retains the current port speed.

Duplex — Specifies the port duplex mode. This field is configurable only when auto negotiation is disabled, and the port speed is set to

10M or 100M. The possible field values are:

Auto — Use to automatically configure the port.

Full — The interface supports transmission between the device and its link partner in both directions simultaneously.

Half — The interface supports transmission between the device and the client in only one direction at a time.

No Change — Retains the current port duplex mode.

Flow Control — Specifies the flow control status on the port. Operates when the port is in full duplex mode. The possible field values are:

Enable — Enables flow control on the port.

Disable — Disables flow control on the port.

No Change — Retains the current flow control status on port.

Reactivate — Reactivates a port if the port has been shutdown through a device security option. The possible field values are:

Reactivate — Reactivates a port.

No Change — Retains the current port status.

Select Ports — Selects the ports to be configured.

2Define the fields.

3Click . The ports are configured, and the device is updated.

Page 103
Image 103
3Com 2924-PWR manual 103