3Com 2924-PWR manual To define ACL Binding, ACL Binding Setup

84CHAPTER 4: MANAGING DEVICE SECURITY

Configuring ACL The ACL Binding Setup Page allows the network administrator to bind Binding specific ports to MAC- or IP-based ACLs.

The monitor user has no access to this page.

To define ACL Binding:

1Click Device > ACL > ACL Binding > Setup. The ACL Binding Setup Page opens:

Figure 36 ACL Binding Setup Page

The ACL Binding Setup Page contains the following fields:

■Select Port(s) — Selects the ports to be configured.

■Bind ACL — Assigns an Access Control List to a port or LAG.

■MAC-based ACL — Displays the MAC based ACL to which the interface is assigned.

■IP-based ACL — Displays the IP based ACL to which the interface is assigned.

■Select ACL — Selects the ACL from a list of previously defined Access Control Lists to which the port or LAG can be bound. To bind an ACL to a LAG, the ACL should be bound to its port members.

2Define the relevant fields.

3Click . ACL Binding is defined, and the device is updated.