![](/images/new-backgrounds/1202253/202253331x1.webp)
166CHAPTER 13: CONFIGURING QUALITY OF SERVICE
To configure CoS values to queues:
1Click Device > QoS > CoS to Queue > Setup. The CoS to Queue Setup Page opens:
Figure 80 CoS to Queue Setup Page
The CoS to Queue Setup Page contains the following fields:
■Restore Defaults — Restores the device factory defaults for mapping CoS values to a forwarding queue.
■Class of Service — Specifies the CoS priority tag values, where 0 is the lowest and 7 is the highest.
■Queue — Defines the traffic forwarding queue to which the CoS priority is mapped.
2Define the queue number in the Queue field next to the required CoS value.
3Click . The CoS value is mapped to a queue, and the device is updated.