153

Modifying Spanning TheSpanning Tree Modify Page contains information for modifying Tree Spanning Tree parameters.

Monitor users have no access to this page.

To modify Spanning Tree:

1Click Device > Spanning Tree > Modify. The Spanning Tree Modify Page opens:

Figure 72 Spanning Tree Modify Page

The Spanning Tree Modify Page contains the following fields:

STP — Specifies if STP is enabled on the port. The possible field values are:

Enable — Indicates that STP is enabled on the port.

Disable — Indicates that STP is disabled on the port.

Port Fast — Specifies if Fast Link is enabled on the port. If Fast Link mode is enabled for a port, the port is automatically placed in the Forwarding state when the port link is up. Fast Link optimizes the STP protocol convergence. STP convergence takes 30 seconds and is not dependent on the number of switches in the network. The possible field values are:

Page 153
Image 153
3Com 2924-PWR manual To modify Spanning Tree, Spanning Tree Modify