FITTING THE LID
We recommend the lid hinge block are fitted before installing the hob into the worktop.
To install the lid onto the hob, proceed as follows:
a.Remove the right and left hand grid blocks fitted to the back of the hob, by unscrewing the relevant screws (fig. 11)
b.Fit the lid hinge blocks onto the hob, using the original screws, ensuring that the relevant shims are fitted between the hinge blocks and the hob (fig. 12);
c.Fit the left hand lid hinge (marked S) into the hinge block (fig.12);
d.Carry out the same operation with the right hand lid hinge (marked D).
ADJUSTING THE LID BALANCE
To adjust the lid balance, turn clockwise or anti- clockwise the central screw of the right- and
FO 2035 |
Fig. 11
FO 2036 |
Fig. 12
FO 2037
Fig. 13
11
