Commissioning

When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below.

- Turn the gas tap to the MAX position and ignite.

- Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below.

Procedure:

Re-ignite the burner and set to MIN.

☞Remove the control knob, insert a thin bladed screwdriver down the centre of the gas tap control shaft and turn the adjustment

screw until the flame is steady and does not extinguish, when the knob is turned from MIN to MAX. Repeat this procedure for all burners.

Pressure Testing

☞Remove left hand pan support and front left burner cap and crown.

Fit manometer tube over the injector.

Turn on the burner gas supply and ignite another burner.

The pressure reading should be nominally 20mbar and must be between 17 mbar and 25mbar.

Turn off the burner supplies.

Conversion from Natural Gas to LPG

It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted. The gas rate is adjusted to suit.

Method

•Ensure that the gas taps are in the 'OFF' position

•Isolate the hob from the electrical supply

•Remove all pan supports, burner caps, rings, crowns and control knobs.

•With the aid of a 7mm box spanner the burner injectors can then be unscrewed and replaced by the appropriate LPG injectors.

TO ADJUST THE GAS RATE

With the aid of a thin bladed screwdriver completely tighten down the by pass adjustment screw, which is located down the centre of the gas tap control shaft.

Upon completion stick the replacement rating plate on the under side of the hob.

IMPORTANT

The replacement/conversion of the gas hob should only be undertaken by a competent person.

18

Page 16 Page 17
Page 17
Image 17
Zanussi ZGF 982 manual Commissioning, Procedure, Pressure Testing, Method, To Adjust the GAS Rate
Page 16 Page 17

ZGF 982 specifications

The Zanussi ZGF 982 is a built-in gas hob that combines style, functionality, and advanced cooking technologies, making it a favorite choice for modern kitchens. Designed with attention to detail, this model not only enhances the aesthetic of your kitchen but also elevates your cooking experience.

One of the standout features of the Zanussi ZGF 982 is its robust four-burner configuration, which provides excellent versatility in cooking. The burners come in varying sizes, allowing you to prepare multiple dishes simultaneously, from simmering sauces to boiling pasta. This flexibility is ideal for families or those who enjoy entertaining guests.

Moreover, the ZGF 982 is equipped with high-efficiency burners that optimize gas usage without compromising on performance. This efficiency not only reduces energy costs but also minimizes the environmental impact. The burners also feature a flame failure safety device, ensuring that gas supply is cut off immediately when the flame goes out, which enhances safety in the kitchen.

Another impressive aspect of the Zanussi ZGF 982 is its sleek design, featuring a glass ceramic surface that is not only easy to clean but also adds a modern touch to any kitchen decor. The smooth surface prevents food from sticking, making post-cooking cleanup a breeze. Additionally, the hob is designed for easy installation, ensuring homeowners can integrate it seamlessly into their kitchen configurations.

The intuitive controls of the ZGF 982 allow for precise temperature adjustments, turning the cooking process into an enjoyable experience. These controls are ergonomically placed and easy to reach, providing ease of use when you’re busy in the kitchen.

Incorporating the latest in cooking technology, the Zanussi ZGF 982 is also compatible with various cookware types, including cast iron, stainless steel, and non-stick cookware, expanding your culinary options. This flexibility empowers home cooks to experiment with different recipes and cooking techniques, ranging from traditional to contemporary styles.

In summary, the Zanussi ZGF 982 is a versatile and stylish gas hob that boasts excellent efficiency, safety features, and ease of use. Whether you are a novice cook or a seasoned chef, this model is designed to meet all your cooking needs while enhancing the overall look of your kitchen. With its combination of innovative technology and functional design, the Zanussi ZGF 982 proves to be a valuable addition to any culinary space.
Top Page Image Contents