Zanussi ZGF 983 manual Building, = Auxiliary burner SR = Semirapid burner = Rapid Burner

7. Building In

A = Auxiliary burner	SR = Semirapid burner
R = Rapid Burner	UR = Double Crown Burner

These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 9.

SR

A

UR

SR

R

860 510

Fig. 9

FITTING THE LID

We recommend the lid hinge block are fitted before installing the hob into the worktop.

To install the lid onto the hob, proceed as follows:

a.Remove the right and left hand grid blocks fitted to the back of the hob, by unscrewing the relevant screws (fig. 10)

b.Fit the lid hinge blocks onto the hob, using the original screws, ensuring that the relevant shims are fitted between the hinge blocks and the hob (fig. 10);

c.Fit the left hand lid hinge (marked S) into the hinge block (fig.11);

d.Carry out the same operation with the right hand lid hinge (marked D).

ADJUSTING THE LID BALANCE

To adjust the lid balance, turn clockwise or anti- clockwise the central screw of the right- and left-hand hinges (fig. 12).

FO 2035

Fig. 10

FO 2036

Fig. 11

FO 2037

Fig. 12

39