Zanussi ZHC72X installation instructions Something not Working, Service and Spare Parts

SOMETHING NOT WORKING

If, having carried out these instructions carefully, your cooker hood fails to work properly please carry out the following checks.

Symptom	Solution
The cooker hood will not start	Check that the hood is connected to the
	electricity supply.
	Check that the fan speed control is on.
The cooker hood is not working effectively	Is the fan speed high enough for the task?
	Is the grease filter clean?
	Is the kitchen adequately vented to allow
	the entry of fresh air.
	If set up for re-circulation, check that the
	charcoal filter is still effective.
	If set up for extraction, check that the
	ducting and outlets are not blocked.
The cooker hood has switched off during	Has the safety cut-out tripped? Turn off the
operation
	hob and wait for the device to reset

If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model number and serial number.

Please note that it will be necessary to provide proof of purchase for any in- guarantee calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

SERVICE AND SPARE PARTS

If you require an engineer or wish to purchase spare parts contact your local Service Force Centre by telephoning:

08705 929929

Your telephone call will be routed to the Service Force Centre covering your postcode area.

For general assistance with your appliance or for information on other Zanussi

6

products please contact our Customer Care Department.

Customer Care Department

Zanussi

55-77 High Street

Slough

Berkshire

SL1 1DZ

Telephone: 08705 727727 *

*calls to this number may be recorded for training purposes