INSTALLING THE COOKER HOOD
Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown.
All installations must comply with the local authorities requirements for the discharge of exhaust air.
Incorrect installation may affect the safety of this cooker hood.
Installation Requirements
Before installation check that the wall to which the cooker hood is to be fitted for electric cables, water pipes and gas.
Unpacking
Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton.
Ref: | Qty: | Product Components |
1 | 1 No | Canopy complete with: |
|
| Controls, Lighting, Fan Assembly, |
|
| Grease Filter, Charcoal Filter. |
2 | 1 No | Telescopic Chimney comprising: |
2.1 | 1 No | Upper Chimney Stack |
2.2 | 1 No | Lower Chimney Stack |
8a | 1 No | |
8b | 1 No | |
9 | 1 No | |
14 | 1 No | Ducting Extension Pipe |
14.1 | 2 No | Recirculation Outlet Extentions |
15 | 1 No | Recirculation Outlet Adapter |
Ref: | Qty: | Installation Components |
7.2.1 | 2 No | Upper Chnimey Fixing Brackets |
12c | 6 No | Chimney Fixing Screws |
|
| 2.9x6.5mm |
Ref: Qty: | Documents |
1 No | Instruction Booklet |
1 No | Guarantee Card |
1 No | Questionnaire |
This cooker hood is designed to be fixed to any vertical surface over a cooking area, and can be used in the extraction (ducted to the outside) or recirculation mode.
The installation work must be undertaken by a qualified and competent person.
The manufacturer disclaims any responsibility for damage due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation.
15
14.1
7.2.1
14
9
2.1 | 12c |
| |
2 |
|
8b | 8a |
| |
2.2 |
|
1
11