1Safety Instructions for the Installer
•A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm.
Suitable isolation devices include line protecting
•In respect of fire protection, this appliance corresponds to type Y (EN 60
•Drawers may not be fitted underneath the hob.
•The installation must guarantee shock protection.
•The kitchen unit in which the appliance is fitted must satisfy the sta- bility requirements of DIN 68930.
•For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.
•On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout.
•On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in place with a suitable artificial resin or mixed ad- hesive.
•Ensure that the seal is correctly seated in the frame and that it is seated against the work surface without leaving any gaps. Addi- tional silicon sealant must not be applied; this will make removal more difficult when servicing.
•The hob must be pressed out from below when removed.
85
