25

PROBLEM POSSIBLE SOLUTION

The flame colour is orange/yellow. Due to the design of the burner the flame can
appear to be orange/yellow (flame disturbance) in
certain areas of the burner this is a natural
occurrence.
The burner is not igniting or only partially lighting. Check that the burner is dry and that food spillage
or cleaning fluids are not present on the burner.
This can be dried with a cloth and stubborn marks
cleaned away with a dry nylon brush (old
toothbrush etc.)
The burner sounds noisy. It is natural for the burners to emit noi se as the
gas is being drawn through the burner and may
reduce as they heat up.
The burner is emitting a popping sound. This is a natural occurrence when the burner is
alight and does not affect the performance of the
burner.
Noise. It is normal for some metal parts on the cooker to
produce noise when in use, this is due to
expansion and contraction when heating up and
cooling down.

Technical data

Dimensions

Height: 900mm (nominal)
Width: 550mm (nominal)
Depth: 600mm (to front of door panel )
Weight: 58Kg
Space for fixing at hob level 2mm minimum clearance.
Space for fixing above hob level See important note ‘Location of appliance’.
Minimum space above hob level 650mm (If a cooker hood is fitted refer to the
cookerhood installation instructions).
Minimum distance from rear wall 5mm (spacer given by pressed spacer on vent
panel).
Connections
Gas connection Rear left hand side of appliance at hotplate level.
Rc ½” (½” B.S.P. female)
Electrical connection 230V-240V a.c. 50Hz mains 3-core cable and
moulded plug fuse to 3 amps.
This appliance complies with: European Council Directives Low voltage Directi ve
73/23/EEC, Gas Directive 90/396/EEC EMC Directive 89/336/EEC, CE Marking Directive
93/68/EEC.