Always ensure that the glass is returned to the same side trim it was removed from.
To replace the trim, line up the clips on the underside of the trim with the connectors at the top of the door.
Carefully slide the trim towards the door. Ensure the trim is securely in place before closing the oven door.
WARNING!
Do not attempt to use the oven without the glass being in place.
To clean the inner glass door panels
Clean the inner glass door panels using hot soapy water, hob cleaner may also be used. Do not use hob cleaner on the stainless steel or painted surfaces. Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the glass.
Replacing an oven light bulb
•The type of bulb required is a 300°C 25 watt small Edison Screw.
WARNING!
Disconnect the appliance from the electricity supply before replacing the bulb.
•Make sure the appliance is cool before replacing the bulb.
•Open the door and remove the shelves.
•Remove the glass cover by turning it to the left.
•Unscrew the bulb by turning it to the left.
•Fit a new bulb and then replace the glass bulb cover.
•Refit the shelves.
•Restore the electricity supply.
25
