PROBLEM
The flame colour is orange/yellow.
The burner is not igniting or only partially lighting.
The burner sounds noisy.
The burner is emitting a popping sound.
Noise.
POSSIBLE SOLUTION
Due to the design of the burner the flame can appear to be orange/yellow (flame disturbance) in certain areas of the burner this is a natural occurrence.
Check that the burner is dry and that food spillage or cleaning fluids are not present on the burner. This can be dried with a cloth and stubborn marks cleaned away with a dry nylon brush (old toothbrush etc.)
It is natural for the burners to emit noise as the gas is being drawn through the burner and may reduce as they heat up.
This is a natural occurrence when the burner is alight and does not affect the performance of the burner.
It is normal for some metal parts on the cooker to produce noise when in use, this is due to expansion and contraction when heating up and cooling down.
Technical data
Dimensions
Height:
Width:
Depth:
Weight:
Space for fixing at hob level Space for fixing above hob level
Minimum space above hob level
Minimum distance from rear wall
Connections
Gas connection
Electrical connection
900mm (nominal) 600mm (nominal)
600mm (to front of door panel) 64Kg
2mm minimum clearance.
See important note ‘Location of appliance’. 650mm (If a cooker hood is fitted refer to the cookerhood installation instructions).
5mm (spacer given by pressed spacer on vent panel).
Rear left hand side of appliance at hob level. Rc ½” (½” B.S.P. female)
This appliance complies with: European Council Directives Low voltage Directive 73/23/EEC, Gas Directive 90/396/EEC EMC Directive 89/336/EEC, CE Marking Directive 93/68/EEC.
27
